                     README.TXT File
          README file for iDEN i930 MR Upgrade Utility
                    Version R01.00.01
                 (C) Motorola, Inc. 2006

  This README.TXT file contains important information about 
  iDEN i930 MR Upgrade Utility for Windows.
 
  Read this file in its entirety for the latest information 
  regarding this release.  
  -----------------------------------------------------------

  This file has been divided into the following four sections 
  for easy reference:

        1.  IMPORTANT NOTES
        2.  RELEASE NOTES
        3.  KNOWN ISSUES
        4.  HOW TO REPORT PROBLEMS
        5.  COPYRIGHT NOTICE

1. IMPORTANT NOTES
==================

  - Different personal computers have different hardware and OS (operating system)
    configurations. Therefore the combinations of OS and hardware setups available 
    is large. Some features of this program may not work properly in certain 
    configurations.

  - This iDEN i930 MR Upgrade Utility will not preserve any user data existed prior to 
    the upgrade.


 2. RELEASE NOTES
================
 
  System support:
  ---------------
  1. Support USB communications on the following platforms: Windows XP (service pack 1), 
     and Windows 2000.
  2. In order to use this application, Internet Explorer version 5.0 or higher 
     and Microsoft ActiveSync version 3.7.1 or higher must be installed on your computer.
    

  Phone Model Support:
  --------------------

  1. This iDEN i930 MR Upgrade Utility only supports i930 phone model.

  Upgrade Summary
  ---------------
  
  - This iDEN i930 MR Upgrade Utility will perform the following main operations on 
    i930 phones as part of the upgrade.

	- Upgrade software to version R0B.00.06/R0C.00.05


  USB Operating Instructions:
  ---------------------------


  1. Install the iDEN i930 MR Upgrade Utility on your PC making sure the phone is NOT 
     connected to any of the USB ports.

  2. Start the iDEN i930 MR Upgrade Utility.

  3. Make sure that the phone has a fully charged battery. 

  4. Power off the phone if it is powered on.

  5. Ensure that the cable switch is to the "Flash" position on the data cable.
  
  6. Connect the phone to PC via the data cable.
 
  7. Click on the "Upgrade Phone" button. At the end of update, you will see a success 
     message.

  8. To update another phone, go to step 3.


  NOTE: Avoid disconnecting the phone during USB communication. If phone is
        disconnected during the upgrade process, just reconnect the phone
        to the USB data cable and click OK on the dialog box. Avoid power- 
        cycling the phone.

	To remove USB drivers from WIN2000 follow these steps:
        ====================================================
	(1) Plug in the iDEN USB data cable to the bottom connector of the phone
            to the desired computer.
        (2) Right click on "My Computer" and select "Manage".
        (3) Select "Device Manager" under the tree tab.
	(4) Click the "+" sign in front of "Modems" on the right side of the 
	    Computer Manager Window.
	(5) Highlight "Motorola iDEN USB Modem" and press "Delete"
        (6) Close "Computer Manager" Windows and disconnect the iDEN USB data cable 
            and phone to finish uninstalling.

3. KNOWN ISSUES
===============  


1.   When using USB communication with this utility avoid having other iDEN 
     applications running in the background. This may cause communication 
     errors during the upgrade process.    

2.   If using Windows XP, you may encounter USB communications problem. 
     If problem occurs, go to device manager by right-clicking on 
     "My Computer", selects "Manage". Select "Device Manager" on the 
     left panel. Then select "Universal Serial Bus controllers" on the 
     right panel and expand it. Double-click on "USB Root Hub". This will 
     bring up the "USB Root Hub Properties" dialog. Go to "Power Management" 
     tab and un-check the "Allow the computer to turn off this device to 
     save power". Click "OK". Repeat this process for every USB Root Hub 
     under the "Universal Serial Bus Controller". Reboot the computer. 
     Then retry the operation.

3.   On Windows 2000 with "Service Pack 1, RC 1.1" USB will not work
     properly due to USB incompatibility. Please update Windows 2000
     to "Service Pack 2" for proper operation of USB.

4.   If using Windows 2000 with Service Pack 3 you encounter USB 
     communication problems, go to https://www.microsoft.com to 
     download a hot fix (Q318107).

5.   If the communication fails while using USB with this utility then disconnect 
     the phone and reconnect the cable to try communicating again.

6.   If the communication fails while using RS232, lower the baudrate to 57600 from 
     communication options dialog. You can launch communication options dialog by clicking 
     "Options" button.

7.   If using Windows XP, If you encounter USB communications problem and utility fails to
     communicate with the phone upon retrying, Please restart the application and try again.

8.   If a blue error screen is observed during application use with windows XP, please avoid
     using other USB devices such as USB Storage Drives, USB Hub, etc along with this application
     and please make sure that all USB device drivers are up to date.


4. HOW TO REPORT PROBLEMS
=========================

  We recommend that you report problems to iDEN Customer Care at
  800-453-0920.

5. COPYRIGHT NOTICE
===================

  Windows, Windows 98, Windows ME, Windows NT, Windows XP and
  Windows 2000 are registered trademarks by Microsoft Corporation.

  iDEN is a trademark of Motorola Inc.
